Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
Not just a think tank. An entire army of think.

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


               

Please log in.
Before you can vote, you need to register. Please log in or create an account.

Exaggerated Atkinson Cycle

Achieving the maximum possible thermal efficiency from a piston engine
  (+3)
(+3)
  [vote for,
against]

As we all know, the key determinant in any internal combustion engine's efficiency is its expansion ratio. This is because this ratio denotes how much the mixture of fuel and air is allowed to expand after combustion, and thus how much energy is actually converted to work vs lost to heat.

A common misconception is that the thermal efficiency of an engine is determined by its compression ratio, which makes sense since the mechanical, static compression ratio is equal to the expansion ratio. However, the key thing to note is that while expansion ratios increasing beyond, say 15:1, will continue to yield increases in thermal efficiency, increasing the compression ratio past that point leads to much higher frictional or "pumping" losses.

The diesel engine is known as achieving around 40% thermal efficiency vs. 25% for the otto cycle. Besides perhaps a few percentage points that are accounted for by the fact that diesel engines are not throttled and lose no energy to vacuum, this increase comes purely from the increase in expansion ratio. And what's more, this increase in expansion ratio is not even overly profound (avg diesel compression/expansion ratio is ~16.5:1-18:1 vs up to 12.5:1 for direct injection gasoline). Part of the reason diesel engines run out of steam so early in the RPM range is because the pumping losses from compressing the mixture increase drastically as the revs climb.

The Atkinson Cycle engine works by physically closing the intake valves late to allow a certain volume of air to flow back out. This lowers the "dynamic" compression ratio, and increases thermal efficiency because the expansion stroke is larger than the compression, but at the cost of reduced power density. If the engine is a 3L, and we end up with a maximum of 8/10 original volume left after the Atkinson cycle, you only effectively have a 2.4L.

I propose a highly exaggerated Atkinson Cycle; one that would have an abysmal effective volume and not so great power density, but extremely high thermal efficiency (~70% or greater). What's more, there's really nothing proprietary here; this could be done easily on existing internal combustion engines. It just sounds like a really bad idea until explained.

In my highly exaggerated Atkinson Cycle Engine, the static compression ratio (thus expansion) is 75:1. However, the Atkinson Cycle is implemented in such a way that the engine can only ever hold 2/10 of its original volume; thus a dynamic compression ratio of 15:1 maximum at full load. To throttle the engine, there would be cam phasing such that up to say 95% of air sucked in is expelled back out during compression. All of this means that even at maximum load, the engine is working extremely little at compressing the charge compared to what it harnesses as work.

On the surface, the engine would appear to have characteristics of extremely poor power density. 2/10 original volume means a 2L engine will now only hold 400ccs. However, because of the stratospheric expansion ratio, I predict thermal efficiency in the ~70% range. So while the power density on the surface is only 2/10 original, because the efficiency increases 3-fold compared to an Otto Cycle, the power would also. This would mean around 60% power density vs. an average engine of the same size (which is already character, and most importantly 3x the thermal efficiency.

acurafan07, Mar 26 2012

Not quite exaggerated http://www.youtube....watch?v=m3xsb5CeuXk
[MaxwellBuchanan, Mar 26 2012]

Some good background info http://en.wikipedia...ntake_valve_closing
[scad mientist, Mar 27 2012]

[link]






       Excellent thermal efficiency, but lousy weight and size package.
RayfordSteele, Mar 27 2012
  

       Eh. Lousy by what standards? Diesels already only have 60% power density vs. Otto cycles because of their inability to run anywhere close to stoichiometric (with any semblance of clean burning; without massive soot clouds).   

       So, basically, my idea would have identical power density, but would not need the needlessly heavy internals that a diesel needs to handle compression ignition.   

       Also, it is my opinion that in real world situations, this difference in weight would be negligible unless it required a greater cylinder count. Let's take a Honda Fit; powered by a 1.5L engine, and multiply that engine's displacement by 10/6 to find required displacement of this idea.   

       You get 2.5L; which nearly matches the Honda K24 engine (2.4L). I am having trouble finding exact specs, but I would have a very difficult time believing the difference in weight between the two aluminum block 4-cylinders would be anything greater than, say, 40-50lbs.
acurafan07, Mar 27 2012
  

       I thought that this was an idea for being forced to eat large amounts of meat whilst on an exercise bike.
Until I discovered Smirnoff
gnomethang, Mar 27 2012
  

       The link I added to Wikipedia shows that this these concepts have been researched, but stuff I read online seems to be heavily biased with the assumption that reducing power output is bad. You seem to be looking at it from a better perspective that upgrading the engine size to maintain adequate power may be worthwhile for the efficiency gains.   

       I'm looking into buying a new car for commuting. What I'd really like is a small two seat "sports" car, but with the engine of an economy car. Most car companies in the USA sell economy cars and sports cars. The sports cars generally have smaller dimensions but larger engines. I'd like to get the small engine in the small car, resulting in better acceleration and fuel economy than the economy car, not to mention the nicer looks.   

       This idea gets me thinking: Would it be possible to use the standard large engine in the sports car and replace the cam to make it more efficient than the economy car engine? I've heard that you can buy racing cams to boost your horespower. Has anyone heard of any company selling an econo-cam? I assume there might be lots of other modification needed to make this work well. Boosting horsepower can be done rather crudely if you don't care too much about efficiency, emmisions, engine life, etc. I would want to trade off power for fuel economy, but maintain (or improve) emmisions and engine life.
scad mientist, Mar 27 2012
  

       It's not just the engine block. It's the size of the entire car that needs to accommodate it. Heavier suspension, bigger mounts, more steel in the front subframe, wider track width, bigger car.
RayfordSteele, Mar 28 2012
  
      
[annotate]
  


 

back: main index

business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle