h a l f b a k e r y
There's no money in it.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
or get an account
It's pretty clear that the subject of icemaking, for beverages, refreshments and/or
drinks, is one that occupies many Halfbakers' minds.
The fundamental problem with all ice trays, it seems to me, is that they exist. Their
existence, in turn, means that the ice has to be somehow extracted from
nobody has yet found an elegant way to do this.
The first step is to install, at a convenient spot in your kitchen, a vertical pipe about
six inches in diameter. It needs to be, I don't know, no more than a few thousand
feet tall. This tube is surrounded by refrigeration coils, bringing the internal
temperature to somewhere around -10°C
At the top of the tube is a mechanism, connected to mains water (you may need a
pressure booster), which includes a spray nozzle ejecting a constant mist of very fine
droplets. If the water is clean enough, these should supercool without freezing.
Also at the top of the pipe is a small gun which, on demand, will spit out a few grains
When ice is required, the gun ejects sugar grains, which start to fall through the
supercooled water mist. As they fall, they nucleate ice formation, rapidly forming
large, roughly spherical hailstones which can be retrieved easily from the access
hatch at the bottom of the tower.
As a bonus, grapes or small pets can be dropped down the tower as well, arriving at
the bottom encased in a perfect shell of ice.
One of the possible cubic ice structures
[mitxela, Jan 23 2016]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
||Not that I'm in any way complaining about lack of vertical space in my kitchen, but the same effect may be achievable with a vertical wind turbine of only a few feet high. Bonus if it's made of glass and you can watch the ice crystals grow.
||The same effect might be achievable using a pressure/temp
drop. You hold a water/air mix at a few atmospheres and
dump the pressure as you drop in your nucleation point. If
you get the pressure/temp right, you should switch from a
high pressure saturated water vapour to a suddenly
supersaturated and cold cloud. Insert the nucleation point
and you get your ice. Could shave a fair few hundred feet
off the tower.
||How do you stop them smashing at the bottom?
||How do you get them to be cube-shaped? I don't want ice spheres in my drink.
||//vertical wind turbine//
||We had considered producing a model for low-
ceilinged kitchens. However, early tests were
beset by problems. In particular, the supercooled
droplets quickly iced up the propellor, which in
turn necessitated an anti-icing device on the
blades. This device worked well for very short
intervals, but then the wires would get wrapped
around the prop shaft. So then we tried running
the propellor for 10 turns clockwise, then 10
anticlockwise, which in turn meant installing a
pitch-reversal mechanism. In the end, we weren't
convinced that the machine would be significantly
cheaper than buying a taller house.
||//pressure/temp drop// we tried that exactly
once, using a quick-release valve at the bottom of
the ice pipe. If we ever find where the pipe
landed we'll let you know if it worked.
//How do you stop them smashing at the
bottom?...I don't want ice spheres in my drink.//
A grid of very sharp blades at the bottom of the
shaft kills two birds with one stone.
||// A grid of very sharp blades at the bottom of the shaft
kills two birds with one stone. //
||But how do you extract the ice cubes from the grid of
blades? It seems like we've come full circle back to he
original problem. [+]
||The grid is suspended above a suitable receptacle, so
the ice passes straight through and emerges as
||Pah. Grid of blades. Then how do you chop your cuboids into perfect cubes?
||Clearly the solution lies in forming cubic crystals in the first place. Drop the temperature to below -50°C, and you should be able to grow perfectly cubic crystals in the Ic phase (~, §1, see link etc).
||I bet the ice cubes stick to the receptacle.
||Lasers. The answer is always lasers.
||Shirley an array of supercooled air jets, each individually gimballed and throttlable - would be the more halfbaked solution?
||It could basically levitate and grow a spherical ice cube in front of you.
||^Not to mention being super cool by definition. I think you'd
need a 'seed' ice sphere to get the ball rolling, so to speak.