Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
Huh?

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


                       

Sideways Stapler Mk2

A small stapler for big documents
  (+5, -1)
(+5, -1)
  [vote for,
against]

To make an A5 booklet, you print pages out, 2 at a time, onto A4. Then you lay the sheets on top of each other and staple 'em all together. Ordinarily, your stapler needs to be longer than the width of the page, so an A4 sized booklet would need a stapler about 25cm long.

I think we're coming at this from the wrong direction. Instead of reaching right across a page to staple the other side of it, the Sideways Stapler reaches down from the top of the page to put one staple in, and up from the bottom of the page to attach another. Now a small stapler can be used for big documents.

The stapler itself would look broadly similar to any that normally sits on your desk, but staples would come out at 90 degrees (about the z axis) to the way they usually do. This means that the spring-loaded mechanism for holding more staples would need to be at 90 degrees to its usual location, and would thus protrude from the side of the stapler.

Boring? Guess so. Useful? Surely...

(the Mk2 is because I posted this idea last night... the bakery software remembers it, but the idea has vanished without trace. This is the second attempt.)

david_scothern, Jul 28 2004

What the folding die might look like http://bz.pair.com/fun/fold_die.jpg
A plus shape so that the stapler head could be rotated 90° (about y). [bristolz, Oct 05 2004]

The present solution http://www.staplehe...-reach-stapler.html
[bpilot, Oct 05 2004]

Please log in.
If you're not logged in, you can see what this page looks like, but you will not be able to add anything.
Short name, e.g., Bob's Coffee
Destination URL. E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)






       You're right, the jaws would tend to push one side in before the other... but given that they end up pushing both sides down to the horizontal, I doubt it would really matter too much.
david_scothern, Jul 28 2004
  

       Actually you could build into it a swivel arragement to allow the "hammer" to strike the staple level . But considering all the extra cost wouldn't it be better just to buy one with a bigger arm
tasman, Jul 28 2004
  

       Adjust the angle the staples are held at such that both sides of the staple are contacted at the same time. It's not as if the angle is going to be more than about 5 degrees anyway; we're dealing with a half-inch staple on a four-inch arm.
david_scothern, Jul 28 2004
  

       Sorry, this need is covered by the long- reach stapler. Don't want to buy one for the occaisional need? Then fold the base fully out of the way, put the document on a thick mousepad or foamboard, place the mouth of your stapler on the crease, and staple (the wires will not be clinched on the other side). Flip the document and fold down the wires with something handy such as a pen.
bpilot, Jul 28 2004
  

       [bpilot]: That there is some other way to do something does not mean that an invention to do it a new way is not valid. I mean, one can always walk instead of drive but driving is often a better way to get there.   

       Adding to [tasman]'s thoughts: a slightly articulated staplehead that changes angle when it contacts the surface to be stapled could absorb the skew. Not really sure that the skew would matter much, though, given the loose tolerance of the folding die.   

       A stapler with a head that can be rotated through 90° could serve both normal and binding uses. Someone yesterday had mentioned this and also mentioned that the folding die would assume a “plus” shape instead of the typical slot. This rotation might make the stapler feed mechanism difficult to design unless it, too, rotates with the staple head.
bristolz, Jul 28 2004
  

       [bristolz]: A stapler with a 90 degree or articulated head is simply a long-reach stapler made heavier, more expensive and less durable. There's no improvement if it can't do anything new, so why make it unnecessarily complex?
bpilot, Jul 29 2004
  

       I'm not suggesting adapting a long-reach stapler to this task... the sideways stapler wouldn't need to be large.   

       //More expensive//? Your link shows staplers costing $130. Surely that alone justifies an alternative?   

       A new product doesn't necessarily have to do anything new, it just has to do its predecessor's job better. Surely a reliable swivel joint isn't beyond our capabilities?
david_scothern, Jul 29 2004
  

       I think one of the points here (in the example given of putting two staples in an A5 pamphlet) is that the standard stapler is long enough, just the wrong way round. Good idea, and looking at the one on my desk, pretty easy to fabricate. Bun.
unclepete, Jul 29 2004
  

       I think decoupling the stapler head from the anvil is the key - recall that most staplers open up and can be used as a staple gun (e.g. to staple paper to a cork board.)   

       A pair of similar staplers can be used to staple a sheet to another (even in the extreme middle should occasion arise.) (Even if one or both are very large = several feet /meters on an edge.}   

       Simply open up both staplers and position the active head over the anvil of the other. I have done this with a pair of inexpensive staplers and it works just fine!   

       Magnets appropriately placed can assist.
csea, Jul 30 2004
  


 

back: main index

business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle