Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
The phrase 'crumpled heap' comes to mind.

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


     

steady frequency power

Easy frequency control of small AC generator
  (+3)
(+3)
  [vote for,
against]

Typically a small generator (alternator, technically) to provide AC power consists of a rotating magnet and stationary stator coils that produce the electricty. If the rotating magnet is an electromagnet, DC power is supplied to it via sliprings. The amount of current consumed by the rotor magnet is relatively small, and by varrying the voltage to the magnet (using simple semiconductors) the output voltage of the whole generator can be precisely controlled (automotive alternators work exactly like this).

The output frequency of such a generator is directly related to shaft RPM. For a generator used to provide household AC power the frequency must be maintained very close to 60 (or 50) Hz. This is both difficult and inefficient. Whenever the load fluctuates severely, the RPM of the driving engine may mometarily fluctuate, causing frequency error. And also whenever the electrical load is very low the engine must still remain at the normal RPM, even though barely any work is being performed by it.

I propose replacing the "single pole" rotor magnet with a three-pole arraingment. This would require one additional slipring. If the RPM's are at the normal correct value, only DC would be sent to the three pole rotor, ie 100% positive voltage to phase1, and negative 50% voltage to phase 2 and 3. The three pole rotor would in this case be acting like a static magnet

However, if the RPM's of the input shaft were to drop, the "electrical position" of the three phase rotor could be advanced to compensate. For example, if RPM drops caused the generator output to drop by 5HZ, then 5 HZ sinewaves would be applied to the three phase magnet. So even though the rotor was physically spinning at 55HZ, its magnetic field would in effect by spinning at 60HZ!

Now there already exists small "solid state" generators that dont require the engine to maintain RPM's to maintain an output frequency. They are relatively expensive and hard to find in larger wattages. This is becasue they use semiconductors to rectify an alternators output to DC, and then pulse width modulate the DC into whatever output frequency you want. Since the full output power must pass through the semiconductots, they require large and expensive semiconductors.

My design is more efficient, because the semicondcutors only need to be sized large enough to handle the relatively small rotor current.

ServoMan314, Oct 03 2006

Please log in.
If you're not logged in, you can see what this page looks like, but you will not be able to add anything.
Short name, e.g., Bob's Coffee
Destination URL. E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)






       Sounds good.   

       I assume your rotor current semiconductors will be able to respond quicker to shaft speed fluctations than electro-mechanical shaft speed governers can.   

       Would output voltage be unchanged using your system (considering peaks and troughs in the rotor windings)?
Texticle, Oct 03 2006
  

       [Texticle] Seems to me that any fluctuation in the generator's output voltage could be overcome by deliberately producing a slightly higher than desired output voltage which is then fed into a voltage limiting circuit.
augusta, Oct 03 2006
  


 

back: main index

business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle