Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
"Bun is such a sad word, is it not?" -- Watt, "Waiting for Godot"

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


             

Please log in.
Before you can vote, you need to register. Please log in or create an account.

Digital Heat Engine

Replaces Stirling "flywheel" control, with digital control
  (+1)
(+1)
  [vote for,
against]

OK it wont be a "pure" mechanical solution, so wont rely only on the expansion of heat and the physics of a flywheel, but you could get better efficiency by loosing less to friction, and its probably a more silent, more practical and better for Low Temperature Difference (LTD), heres how: (halfbakery oath inserted...)

There is only one NON-METALLIC canister filled with air, and well insulated from the heat.

In the middle of this cannister there is a "piston / displacer" that has a magnet attached to it. This piston divides the canister in two. The piston (with its magnet) is the only moving part. The magnet is used for energy output, as soon explained.

There are two winding radiators on each side of the cannister - possibly inside the cannister or connected to it so that the energy dissipates to the air in the cannister. So each side has one radiator for hot fluid and one for cold. These are used for the energy input.

The flow of hot or cold is controlled digitally, and is set to heat one side of the cannister while cooling the other, then changing the direction, heating the second side of the cannister and cooling the first.

The fluid is pumped (the only energy input besides the digital control unit) from the hotter and colder energy sources (such as a burning candle and an ice cube for a youtube demo or from the roof of a house and the front lawn, for a practical use).

The moving magnet can allow the heat energy to be retieved: Here are two examples how:

a. The magnet can pull or push a flywheel via a magnetic clutch (or magnetic gear - see links). This flywheel stores the energy or converts it to other forms of energy.

b. Or the magnet could press against another magnet, which by being repelled, compresses air.

For a large enough contraption it could work extremely slowly, giving high "torque".

Several of these units can be set in a circle creating a "rotary motor"

This type of motor could be set to receive large amounts of energy in a very small difference of temperatures ie from a solar heater on the roof and a cooler pipe in the lawn, or as another example: from along the dark and hot roadside (which is hot even at night as anyone who used a thermal [[NVD]] can attest to).

The "piston" could be set on a hinge in a u-shaped tube. If developed with high precision, it could confine the friction only to the hinge.

The cannister (and perhaps piston too) could be built to be very wide and thin so that minimal movement is done between cycles and a higher frequency achieved.

The whole thing wouldn't be all that efficient as a Stirling engine, but could be made mostly of plastic parts, real cheap and fast to apply, for solar power waste energy retrieval.

pashute, Apr 14 2010

Linear Combustion Engine http://www.youtube....watch?v=pX3oAjnYZgc
[pashute, Apr 15 2010]

baked :-) or should it be :-( http://www.youtube....watch?v=w3jIFCtIS_U
Electronic (digital) stirling engine [pashute, May 28 2010]

[link]






       I just saw on the web a "linear combustion motor", for generating electricity. It would behave very similar to this idea, only because of the slow speed of heat transfer into expansion (especially with gas) I don't believe it could reach such frequencies.
pashute, Apr 15 2010
  

       The thermal capacity of the ends of the cylinder and the radiators will be massively in excess of the thermal capacity of the air in the cylinder, so most of the energy will go to heating and cooling parts of the engine instead of the working fluid.   

       Much easier to move the light air between a hot place and a cold place. That would be a Stirling engine.   

       The digital control merely takes the place of the stirling engines mechanical coupling between piston and displacer.
Twizz, Apr 15 2010
  

       merely... I'm not sure the mechanical coupling is the best solution, in fact from the noise I hear on all models I ever saw, live or in the u-tube, I'm quite sure there's vast room for improvement. So if you have everything moving magnetically, and sealed perfectly (by using water or some other liquid on the bottom of the "cups") and get the flow going according to sensors and some calculations - its downhill baking to get better efficiency.
pashute, Apr 22 2010
  

       Well, it seems the idea has been baked and works, with a free piston engine and electronics.
pashute, May 28 2010
  
      
[annotate]
  


 

back: main index

business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle