h a l f b a k e r yStill more entertaining than cricket.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
Take a standard intake valve, cut four holes through the sealing end, and put a smaller valve inside the big one. Now you have the smaller valve opening first, allowing some air in through the four holes, and then the bigger valve opening later allowing the rest of the air in.
This solves the problem
of interfering valve design, where you can't open a valve too early or it will hit the piston. A way to get more air into the chamber at high RPM.
[link]
|
| |
Yes, it's all about the valves. I weld them tight in my engine design at Horible Terrible Ice-Bots, recent submission. |
|
| |
Unless you have a blower or pressure from a tuned intake no air is trying to get past the valve before or near top dead center. Opening before top dead center is done to give the valve a "head start" so it will be more open when air must pass through it. It's less wear and tear on the machinery to give the valve a little head start instead of forcing the valves open and shut faster with more aggressive cam profiles. |
|
| |