h a l f b a k e r y
Incidentally, why isn't "spacecraft" another word for "interior design"?
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
or get an account
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
I've been watching the way sunlight clears snow and ice
from driveways and sidewalks, and I think I've learned
First, some things that are obvious:
After a small area of the driveway snow melts down to
pavement, the heat from the sun on the cleared
course, help to melt the rest. The sunlight that
falls on snow-covered pavement, on the other hand, will
mostly be reflected, and will be much less effective at
melting snow. So, ideally, one would not want the
driveway to melt uniformly; it would be better for some
fraction to melt all the way down to pavement, so it can
begin right away to absorb solar energy. This would
increase the total heat input, and thus melt the whole
driveway as rapidly as possible.
That is what happens, in fact, but it doesn't work nearly
well as it should. Instead, cleared areas increase much
more slowly than the available energy should accomplish;
ice at the edges melts to water, and that water
into dry winter air, taking a *huge* amount of heat
with it. Meanwhile, the nearby dry pavement gets much
warmer than is needed to melt snow, but this energy is
mostly wasted. Most of the dry pavement just heats the
air; its warmth doesn't melt anything, because asphalt
lousy thermal conductivity.
But increasing the thermal conductivity would not help if
most of the driveway were snow covered. In that case,
increasing the thermal conductivity would actually be a
idea, because the large snow covered area would then
keep the whole driveway cold enough that ice wouldn't
even melt, let alone vaporize.
The crux of the problem, I think, is in getting that melt
water out of the picture, so it doesn't suck up energy
could have melted more snow. Draining would help, but
my driveway is too flat for this to happen, so snow just
sits there and waits for melt water to evaporate.
So (finally) here's my idea:
What I'd like to have is a surface that wicks moisture
melted ice over the entire area of cleared pavement, so
the whole area can contribute energy to warm and
I could cover the driveway with canvas, or something,
I think that would help. But my wife would have a cow,
and the neighbors would make jokes about curb-to-curb
carpeting. Maybe very thin grooves would work, but I'm
reluctant to damage my driveway surface, because I'd
probably get pot holes. So I'm thinking about using that
seal-coating stuff, and putting grooves in that (next
summer, of course. Ya can't seal coat in Chicago in
Backpack blower moves new snow light snow easily
The pavement is left mostly bare for the sun to finish up, if it stops snowing.. [popbottle, Dec 08 2015]
||You could get your wife's cow to help; maybe by hiding tasty cow treats under the snow so she digs up the snow to get at them. Wait, have I missed something?
||Not at all, 'spidermother'. I completely neglected
to view the cow as possibly a useful item. (I am
not -- I am NOT --going to compliment you for
thinking out of the box. That would be an udderly
tasteless pun, and I'm better than that. Usually
I'm better than that.)
||Hmm - I'm not sure the wicking action would work if the wicking material itself was frozen. However, it would be interesting to see the difference in melting time between two areas of snow where one had been sprinkled with a dark-coloured food dye. The other approach which occurs to me is to have a glass driveway - the upper surface would be some sort of bumpy glass and fibre optic 'light pipes' would funnel sunlight from, say, your roof, down to the driveway. If the light entered at the end of the driveway, it would exit through the bumps on the glass, causing the snow pack to melt from the underneath.
||//I'm thinking about using that seal-coating //
||I'm tentatively this summer going to whitewash the drive to reduce the barefoot burn-factor... hopefully it will be washed away and next winter be nice and black again to soak up the sun and melt snow at the beginning and end of winter.
||//paint the snow black//
Yet another use for Carbon dust harvested from CH4>H2 transmogrifiers.
||//paint the snow black// This was tried to hasten the melting of icebergs, but the black stuff ran off too quickly as the surface melted.
||You could use a modified lawn roller (you know, the huge ones used on bowls greens) with spikes on...
||The spikes would penetrate the snow to give a large number of black hot spots, and the rolling effect would reduce the insulating air pockets in the snow.
||If you were feeling really keen, you could run the roller along every hour or so to 'press' the latent water out.
||Another aproach could be to use a thin film of semi-permeable membrane with salt sprinkled underneath it. This would 'suck' the meltwater underneath it as it pooled through osmosis due to the salt concentration gradient. The warm spots would then be able to partly use the meltwater as a heat transfer fluid as it flows eventually to the edge of the drive.
||What about a big solar reflector to focus light on a patch, which would move across your driveway during the day?
||An alternative way to deal with meltwater: if you
construct your driveway out of what's known as
"permeable paving," the water will drain straight
downward, through the driveway into the soil
||Next, if you're digging up your driveway to install
permeable paving, you might take the time to also
install heat exchange tubing, through which you can
circulate a water/antifreeze mix.
||To simultaneously heat and circulate that liquid
(without using electricity), you can use a "solar bubble
||or, put vertical loops of antifreeze/water in.
Convection will carry the cold stuff down, where it
will warm up and rise through the other half of the
loop. Round and round, passive, 0 energy input.
||// if you construct your driveway out of what's known as
"permeable paving," the water will drain straight downward
||If you live in a climate cold enough to make icing a
problem, eventually the permeable material will chill to
the point that it freezes water on contact rather than
letting it drain through, and in short order the ice buildup
will have clogged the stuff and caused an ever-expanding
puddle of ice to spread across your driveway...